ÜRÜN KODU= VMGS MOTORISED GUILLOTINE SHEAR
Machines have Strong, welded and solid steel body providing maximum
cutting precision.
For 2 – 3 mm Machines, 2 cutting edges on the upper blade 2 cutting
edges on the lower blade.
Machines body from steel.
For 4 – 5 – 6 Machines, 2 cutting edges on the upper blade 4 cutting
edges on the lower blade.
600 mm manual Back Gauge.
For 2-3 mm machines,T-slotted square with 800 mm length and metric
ruler.
For 4-5-6mm machines,T-slotted square with 1000 mm length with
stopper and metric ruler.
Mechanical pressure system that prevents the sheet from slipping
during cutting.
Easily adjustable blade gap adjustment system.
Ball bearing front table.
Squaring arm with metric ruler.
Cutting line illumination.
Front hand protection guard.
Foot pedal.
Rear foot guard.
Emergency stop buttons.
Front support arms.
The VMGS series brings motorized powerful working for your light to moderate cutting process. With ball transfer system ultra thin sheets can be postioned without any difficulty. VMGS series guillotine shears allow it to cut from 1050mm to 4050mm shearing lenght, and 6mm shearing capacity. This machine working principle is called direct drive, which means couples the load directly to the motor without any mechanical transmission. Advantages of this technology are increased production cycle. They are suitable for maximizing serial production. Direct drive system is also provides to minimizing industrial noise in your factory.
